Onkyo TX-SR393
Short review
Buy Onkyo TX-SR393
Onkyo TX-SR393 specifications
Yandex.Market data
| General characteristics | |
| A type | AV receiver, 5.2 |
| Number of channels | 5 |
| Circuit design | semiconductor |
| Amplifier parameters | |
| Front channel power | 155 W (6 ohms, 1 kHz, 1 ch, 10% THD), 135 W (6 ohms, 1 kHz, 1 ch, 1% THD), 80 W (8 ohms, 20 Hz - 20 kHz, THD 0.08%) |
| Recommended load resistance | 4 - 16 Ohm |
| Reproducible frequency range | 10 - 100,000 Hz (+ 1 / -3 dB) |
| Harmonic coefficient | 0.08% (20 Hz - 20 kHz) |
| Signal to noise ratio | 109 dBA |
| Line in / out | |
| Sensitivity | 200 mV |
| Input impedance | 47 k Ohm |
| Output voltage | 1000 mV |
| Output Impedance | 2.3 k Ohm |
| Adjustments | |
| Balance adjustment | there is |
| Tone control | there is |
| Bass tone control range | 10 dB |
| Treble tone control range | 10 dB |
| Digital audio processing | |
| DAC | yes, 384 kHz / 32 bit |
| Digital Processor (DSP) | there is |
| Interfaces | |
| Inputs | HDMI x4, Coaxial x1, Optical x1, Linear x3 |
| Outputs | subwoofer x2, headphones x1, line x1 |
| Front panel connectors | headphones |
| 4K signal support | there is |
| Headphone jack | 6.3 mm |
| Connectors for acoustics | screw + spring |
| Functions | |
| Direct mode | there is |
| Auto surround calibration | there is |
| Upgrading to 4K | there is |
| OSD Menu | there is |
| Networking capabilities | Bluetooth |
| Decoders | |
| Dolby Digital | there is |
| Dolby Digital Plus | there is |
| Dolby TrueHD | there is |
| Dolby Atmos | there is |
| DTS | there is |
| DTS Express | there is |
| DTS 96/24 | there is |
| DTS-HD High Resolution Audio | there is |
| DTS-HD Master Audio | there is |
| DTS: X | there is |
| DTS Virtual: X | there is |
| Tuner | |
| Tuner type | digital |
| Modes | AM / FM |
| Number of stations | total: 40 |
| AM frequency range | 522/530 -1611/1710 kHz |
| FM frequency range | 87.5 - 108.0 MHz |
| Functions | auto tuning, manual tuning, RDS |
| Food | |
| Power Supply | built in |
| Power consumption | 465 Wt |
| Design | |
| Display | there is |
| Dimensions (WxHxD) | 435x160x328 mm |
| Weight | 8.2 kg |
| Additional Information | |
| Remote control | there is |
Opinions from the Onkyo TX-SR393
Yandex.Market data
Advantages:
Good receiver for the entry level. It should be noted that you need to have knowledge of adjusting sound parameters. If you set up the default acoustics using a calibration mic, you may not like the sound. I tune for my room in terms of frequencies and distance to each speaker manually. The receiver lived up to expectations.
Disadvantages:
I haven't found it yet.
Comment:
November 27, 2020, Moscow
